Skip to Main Content
It looks like you're using Internet Explorer 11 or older. This website works best with modern browsers such as the latest versions of Chrome, Firefox, Safari, and Edge. If you continue with this browser, you may see unexpected results.

Biomedical Engineering: 42-684/06-500: Principles of Immunoengineering and Development of Immunotherapy Drugs: Content

This guide provides links, tutorials, and tips for finding and presenting scholarly information in biomedical and chemical engineering.

The Basic Format of a Poster

Posters have the same basic components as a manuscript (i.e. introduction, methods, results, conclusions, references, acknowledgements). They don't need to have an abstract because the whole poster can be though of as a visual abstract.  It's a summary of your project that uses a combination of text and graphics. Not including an abstract will free up space that can be used for other content.  

There is not one correct way to organize a poster but typically the sections are chunked and the poster is organized in columns. Below is a common format. The results will be the major component and there are typically 1 to 5 results sections depending on the project.

 

The benefit of this format is that it has logical flow. Posters are often read in the following direction.

Example Posters

Content: the Title

  • 1-2 lines that describes the problem being studied
  • Mention the organism/model system being studied in the title
  • Mention the technique if its important to the study
  • Commonly only first word is capitalized
 

Content: the Introduction or Background

  • One or two short paragraphs or bulleted points
  • States the research question and why it is important
  • The objectives of your research or the hypotheses being tested
  • Mentions model system being used
  • Cites related studies (2-3 references that would be listed in the References section)

Content: the Methods and Materials

  • Briefly describe the experimental methods and materials used
  • Only write about methods that were used to get the results
  • Use schematics when possible to go along with brief amounts of text

Content: the Results

  • This is the heart of the poster and usually gets the most space
  • Choose your key results and organize each as a separate box or piece of paper
  • Give each box a descriptive title of the main finding, not just “Results”, so that the reader is immediately primed for the information you are trying to convey
  • Make sure all graphs, tables, charts etc. are well-labeled
  • Use graphics as much as possible with just enough text that a person can understand it – make every word count!

Content: the conclusions

  • Just a few bullet points describing major conclusions and future directions
  • If the conclusions can be well represented by a schematic, you can include one along with your bullet points